Belt Drive Blower Units

green_squareOur range of double inlet belt drive units range in size from 7” up to 18W, with airflows from 10,000 m³/h up to 60,000m³/h and pressure up to 1,000Pa.

The wheel, casing and side parts are manufactured from galvanised sheet steel. There are several available combinations with singles, doubles and even treble units mounted in parallel. The drive shafts are made in rectified and galvanised steel on single, the two and three fan versions that are mounted in parallel are supported by ball bearing, which are hermetically sealed, pre-greased and self-aligning. The impellers are statically and dynamically balanced according to DIN ISO 1940 class and G 6.3.

Shop Belt Drive Blowers