Description
As air is pulled through a condenser coil, small amounts of dirt deposit on the fins. Left untreated, a layer of dirt builds up over time – acting as an insulating blanket and restricting air flow. This prevents effective heat transfer, so the system has to work harder to dissipate the heat. Energy consumption increases, and the life of the system may be shortened. Avoid all these problems by using AdvancedGel CC, with its powerful cleaning and brightening action.
High rated cleaning performance
Powerful alternative to regular chemical formats
Mix with hot or cold water on site
Takes up less van space & easy to carry
As air is pulled through a condenser coil, small amounts of dirt deposit on the fins. Left untreated, a layer of dirt builds up over time – acting as an insulating blanket and restricting air flow. This prevents effective heat transfer, so the system has to work harder to dissipate the heat. Energy
consumption increases, and the life of the system may be shortened. Avoid all these problems by using AdvancedGel CC, with its powerful cleaning and brightening action.
Each Condenser Cleaner Gel pouch is designed to make 8L of usable product. The easiest way to do this is to pour the entire gel pouch into the bottom of our HydroSprayer and then fill with water up to the 8L mark. Alternatively, the product can be mixed in smaller volumes, using 1 part product to 15 parts water.
Once the water is added, the product will be ready to use in 5 minutes.
To start using the Condenser Cleaner Gel for condenser cleaning, turn off the unit and isolate the electrics. Apply the diluted Condenser Cleaner Gel, with a low pressure sprayer, set on a coarse spray pattern, working from the bottom, across and up. Ensure the coil is soaked and then allow the product to work for 10 minutes. After 10 minutes, thoroughly rinse the coil with fresh water.
Reviews
There are no reviews yet.