Condensate run-off from the coil will drain away slowly. If the coil is very dirty, some of this dirt will be carried into the condensate tray. Sludge and slime building up in the standing water in the tray will eventually run into the drain – causing blockages. Overflow from the tray may damage decoration and furnishings. AdvancedGel DU is designed for systems where a condensate pump is fitted.
Dilute the Condensate Drain Unblocker, using 1 part product to 8 parts water, in a suitable plastic container. Once the water is added, the product will be ready to use in 5 minutes. Remove the excess water from the condensate tray and drain, if possible. Gently pour the diluted Condensate Drain Unblocker Gel, into the tray, and allow it to enter the drain. Allow the diluted Condensate Drain Unblocker Gel to remain in the condensate tray and drain for five minutes or until the obstruction is cleared. After five minutes, flush out with fresh water for 2-3 minutes. Repeat as necessary until the obstruction is cleared.
Diluted Advanced Condensate Drain Unblocker Gel is safe to use where a
condensate pump is fitted.
If you are planning on cleaning the evaporator unit, at the same time as
unblocking the condensate drain, due to compatibility, please ensure that you
use only the Advanced Evaporator Cleaner & Disinfectant Gel or the Advanced
Universal Cleaner Gel.
Product: Incineration on land
Container: Clean with water. Dispose of as normal industrial waste. Do not reuse